Capacity

Facilities at a glance

 

Pantnagar, Uttaranchal

 

Nagpur, Maharashtra

 

The technical capabilities of our plants are as follows:

Height of the fabricating beam can be as high as 2500 MM and it can weigh up to 35 MT. Plate thickness upto 100 MM and holes of 80 MM both for welded joints or bolted construction can be carried out. In flame cutting each machine has multi head oxy-acetylene torches to cut plates in required sizes. The machine is suitable to take plate thickness varying from 6mm to 200 MM. Plant also has shearing machine suitable to cut plate’s upto 25 MM thickness.

 

Plant also has vertical drill machines used for drilling holes in connections and base plates. Drilling operation is carried on CNC automatic drilling and punching machines and 3D axial machines for precise bolted connections.

 

The plant is equipped with six dedicated Submerged Arc Welding(SAW) machines and two heavy structure machines are under installation with semi automatic and automatic welding, butt welding, flange and WEB SAW welding, tilting both sides welding, pre heating and straightening with options of stable rimmed and fast travelling for H-Beam, box beam and T-Section. Plants have semi- automatic assembly machines for WEB and Flanges. After accurate assembly of components, tack welding is done in the machine itself. The machines are sourced from global reputed suppliers. WEB width varies from 300 MM to 2500 MM. Flange width varies from 150 MM to 1000 MM maximum. Maximum thickness of WEB and flange is 80 mm. Maximum length of H-Beam is 12 metres. Fillet size varies from 3 MM to 20 MM.

 

Plants have facility for shot blasting as well as sand blasting. Surface preparation is done as per customer’s requirement before components are finally painted and finished.

 

In cold form, there are machines like,C&Z Purline line that is used for making of purlin/girts,in shape of C and Z .This machine produce maximum 3.15 mm thick purlin and depth of purlin can be given in various size of 150 MM,200 MM and 250 MM and the maximum length would be 12 metres. It is CNC operating machine with online punching facility.

 

Threading machine is used for threading of rods. These machines are suitable upto 45 MM rods and are used for threading on one or both sides of rods for brace rods.

 

A Roof/Wall Cladding and Roll forming line and machine is used for profiling/rolling of sheeting in covered width of 1056 MM. Thickness varies from 0.47 to 0.6 MM.